Select Page

This page gives 20 original Green Belt practice questions with answers and short explanations. The mix follows the January 2026 IASSC Green Belt blueprint: 4 Define, 6 Measure, 4 Analyze, 2 Improve, and 4 Control questions.

The real exam has 100 multiple-choice questions, a 3-hour limit, and a 70% pass mark. Answer these 20 in 36 minutes. A score of 14 or more matches the pass line. Then review each miss by phase. Each answer gives a short reason, so you also learn why the other options fail. Use the formula table first for a quick refresher. These are not real exam questions.

IASSC Green Belt Exam Facts at a Glance

IASSC Green Belt exam format, from the January 2026 PeopleCert syllabus
ItemDetail
Questions100 multiple-choice questions, one mark each
Time3 hours (180 minutes), plus 45 extra minutes for non-native speakers or candidates with a disability
Pass mark70% (70 of 100)
Open bookNo, but a reference document with formulas and tables is provided
PrerequisitesNone
Validity3 years, then a recertification exam
Question levelsRemember, Understand, Apply, Analyze, and Evaluate

Always confirm the current format with IASSC and PeopleCert before you book.

Key Takeaways

  • Measure carries the most weight at about 32%. Improve carries the least at about 8%.
  • The exam tests up to the Evaluate level. Expect scenarios and calculations.
  • You do not need to memorize every formula, but you must know when to use each one.
  • Timed practice matters. The exam allows about 1.8 minutes per question.
  • Log every miss by phase. Patterns show where to study next.

What the IASSC Green Belt Exam Covers

The exam covers the five DMAIC phases. DMAIC stands for Define, Measure, Analyze, Improve, and Control. The weights are not equal.

Exam weights and the question mix in this set
PhaseExam shareApprox. exam itemsQuestions here
Define19%194
Measure32%326
Analyze22%224
Improve8%82
Control19%194
Total100%10020

Weights come from the January 2026 PeopleCert IASSC Green Belt syllabus.

Many older study pages say the exam draws about 20 questions from each phase. The newer syllabus shows unequal weights. Study to the newer blueprint. This set follows it.

Measure carries the most exam weight.

Five bars. Define 19 percent. Measure 32 percent. Analyze 22 percent. Improve 8 percent. Control 19 percent.

Kevin Clay

Public, Onsite, Virtual, and Online Six Sigma Certification Training!

  • We are accredited by the IASSC.
  • Live Public Training at 52 Sites.
  • Live Virtual Training.
  • Onsite Training (at your organization).
  • Interactive Online (self-paced) training,

How to Use These 20 Questions

Green Belt Practice Loop
Green Belt Practice Loop
  1. Set a timer. Give yourself 36 minutes. That matches the exam pace of 1.8 minutes per question.
  2. Answer first. Do not open the answers until you finish.
  3. Check each answer. Read the explanation, even for questions you got right.
  4. Log your misses. Write the phase and the reason, such as a formula error or a concept gap.
  5. Review and retest. Study the weak topics. Then try a fresh set a few days later.

Write why each wrong option is wrong. This builds exam skill fast.

Practice in a loop: test, check, log, review, retest.

A circular loop with five steps: take a timed 36-minute set, check the answers, log misses by phase, review the weak topics, then retest with a fresh set.

Formulas Used in These Questions

The real exam provides a reference document with formulas and tables. Practice with the formulas now, so you know which one to pick.

Formulas and where they appear
FormulaUsed in
DPMO = defects ÷ (units × opportunities) × 1,000,000Question 2
RTY = product of the step yieldsQuestion 3
RPN = Severity × Occurrence × DetectionQuestion 6
Empirical rule: about 68%, 95%, and 99.7% within ±1, ±2, and ±3 sigmaQuestion 8
Cp = (USL – LSL) ÷ 6σQuestion 10
Cpk = smaller of (USL – mean) ÷ 3σ and (mean – LSL) ÷ 3σQuestion 10
Prediction = intercept + slope × XQuestion 15

USL and LSL mean the upper and lower specification limits.

Know when to use each formula.

A cheat sheet lists DPMO, rolled throughput yield, risk priority number, Cp, and Cpk with one worked number each.

Define Phase Questions (Questions 1 to 4)

Define covers about 19% of the exam. It tests project selection, chartering, basic metrics, and Lean waste.

Question 1 (Define, Understand level)

A team makes 500 units. Customers ordered 350. Which Lean waste is this?

  1. Waiting
  2. Overproduction
  3. Motion
  4. Conveyance

Answer: B. Overproduction means making more than the next step or customer needs. Waiting is idle time. Motion is extra movement by people. Conveyance is moving items without need.

Question 2 (Define, Apply level)

A team inspects 400 units. Each unit has 5 defect opportunities. The team finds 30 defects. What is the DPMO?

  1. 1,500
  2. 7,500
  3. 15,000
  4. 75,000

Answer: C. DPMO equals defects ÷ (units × opportunities) × 1,000,000. That is 30 ÷ 2,000 × 1,000,000 = 15,000. The value 75,000 ignores the five opportunities per unit.

Question 3 (Define, Apply level)

Three process steps have first-pass yields of 98%, 95%, and 90%. What is the rolled throughput yield (RTY)?

  1. 83.8%
  2. 90.0%
  3. 94.3%
  4. 98.0%

Answer: A. RTY multiplies the step yields: 0.98 × 0.95 × 0.90 = 0.838. The average (94.3%) hides the units lost at each step.

Question 4 (Define, Evaluate level)

Which problem statement is the strongest?

  1. “Billing is poor and customers are unhappy.”
  2. “We need new billing software to fix invoice errors.”
  3. “Invoice errors are too high, so we will retrain staff.”
  4. “In Q3, 12% of 15,000 monthly invoices (1,800) had errors. This cost about $42,000 per month in rework.”

Answer: D. A strong problem statement gives a baseline, a scope, and an impact. It names no cause or fix. Options B and C jump to a solution. Option A has no data.

Measure Phase Questions (Questions 5 to 10)

Measure is the biggest section at about 32%. It tests process mapping, statistics, measurement systems, and capability.

Question 5 (Measure, Understand level)

Which tool scores process inputs (Xs) against customer outputs (Ys) to rank the Xs?

  1. SIPOC
  2. Pareto chart
  3. Histogram
  4. X-Y diagram

Answer: D. An X-Y diagram, also called a cause and effect matrix, rates each input by its link to customer outputs. A SIPOC maps the process at a high level. A Pareto chart ranks counts. A histogram shows a distribution.

Question 6 (Measure, Apply level)

An FMEA rates four failure modes as Severity, Occurrence, Detection. Which has the highest RPN?

  1. FM1: 9, 2, 3
  2. FM2: 6, 6, 6
  3. FM3: 8, 5, 4
  4. FM4: 4, 8, 5

Answer: B. RPN equals Severity × Occurrence × Detection. FM2 scores 216. FM3 and FM4 score 160. FM1 scores 54. Teams still review high-severity items like FM1, even when the RPN is low.

Question 7 (Measure, Analyze level)

Cycle times in minutes are 12, 14, 15, 15, and 44. The mean is 20 and the median is 15. Why is the mean higher?

  1. The outlier of 44 pulls the mean up.
  2. The data are normal.
  3. The median is always lower than the mean.
  4. The sample is too large.

Answer: A. The mean uses every value, so one extreme value moves it. The median depends on the middle value. Normal data show a mean close to the median.

Question 8 (Measure, Apply level)

A normal process has a mean of 50 and a standard deviation of 2. About what share of output falls between 46 and 54?

  1. About 68%
  2. About 99.7%
  3. About 95%
  4. About 50%

Answer: C. The limits 46 and 54 sit two standard deviations from the mean. About 95% of normal data falls within ±2 sigma. About 68% falls within ±1 sigma. About 99.7% falls within ±3 sigma.

Question 9 (Measure, Analyze level)

A Gage R&R study shows the measurement system uses 8% of total study variation. What do common AIAG guidelines say?

  1. Unacceptable
  2. Acceptable
  3. Marginal
  4. Cannot be judged

Answer: B. Common AIAG guidelines call under 10% acceptable, 10% to 30% marginal, and over 30% unacceptable. At 8%, the gage adds little noise. Some companies set stricter limits.

Question 10 (Measure, Analyze level)

A process has LSL 90, USL 110, mean 104, and standard deviation 2. What is Cpk?

  1. 1.67
  2. 2.33
  3. 1.00
  4. 0.50

Answer: C. Cpk is the smaller of (USL – mean) ÷ 3σ and (mean – LSL) ÷ 3σ. Those are 6 ÷ 6 = 1.00 and 14 ÷ 6 = 2.33. So Cpk is 1.00. Cp is 1.67, so the process runs off center.

Analyze Phase Questions (Questions 11 to 14)

Analyze covers about 22%. It tests inference, hypothesis testing, and choosing the right test.

Question 11 (Analyze, Understand level)

A two-sample t-test on cycle times gives p = 0.03. Alpha is 0.05. What is the correct conclusion?

  1. Reject the null hypothesis. The means differ significantly.
  2. Fail to reject the null hypothesis.
  3. There is a 3% chance the null hypothesis is true.
  4. The difference is large in practice.

Answer: A. The p-value is below alpha, so you reject the null. The p-value is not the chance that the null is true. Statistical significance also does not prove a practical gain.

Question 12 (Analyze, Apply level)

You compare mean wait times at three call centers. The data are normal with equal variances. Which test fits?

  1. Two-sample t-test
  2. Chi-square test
  3. Mann-Whitney test
  4. One-way ANOVA

Answer: D. One-way ANOVA compares the means of three or more groups. A t-test handles two groups. Mann-Whitney is for two non-normal groups. Chi-square tests counts.

Question 13 (Analyze, Apply level)

Resolution times for two teams are strongly skewed. The two samples are independent. Which test compares the teams?

  1. Two-sample t-test
  2. Mann-Whitney test
  3. One-way ANOVA
  4. Paired t-test

Answer: B. Mann-Whitney is the non-parametric test for two independent samples. The t-tests and ANOVA assume roughly normal data.

Question 14 (Analyze, Understand level)

A team says a new supplier improves yield. In truth, it does not. What error occurred?

  1. Type I error
  2. Type II error
  3. Measurement bias
  4. Stability error

Answer: A. A Type I error (alpha) rejects a true null hypothesis, which gives a false positive. A Type II error (beta) misses a real difference.

Pick the test by group count and data type.

Two groups with normal data: two-sample t-test. Three or more groups with normal data: one-way ANOVA. Two groups with non-normal data: Mann-Whitney. Three or more groups with non-normal data: Kruskal-Wallis. Counts in categories: chi-square.

Improve Phase Questions (Questions 15 to 16)

Improve is the smallest section at about 8%. It tests regression and residual checks.

Question 15 (Improve, Apply level)

A regression gives cycle time = 20 + 0.5 × batch size, with R² = 0.81. What is the predicted time for a batch of 60, and what does R² mean?

  1. 30 minutes. 81% of predictions are correct.
  2. 50 minutes. 81% of predictions are correct.
  3. 50 minutes. Batch size explains 81% of the variation.
  4. 50 minutes. Batch size explains 19% of the variation.

Answer: C. The prediction is 20 + 0.5 × 60 = 50 minutes. R² is the share of variation the model explains. It is not the share of correct predictions.

Question 16 (Improve, Analyze level)

A residual plot fans out like a funnel as fitted values rise. What does this show?

  1. Constant variance, so the model is fine
  2. Unequal variance, so consider a transformation such as Box-Cox
  3. Perfectly normal data
  4. A very strong correlation

Answer: B. Residuals should spread evenly. A funnel shows unequal variance. A Box-Cox transformation can help.

Control Phase Questions (Questions 17 to 20)

Control covers about 19%. It tests Lean controls, control charts, and control plans.

Question 17 (Control, Apply level)

A lab measures one batch’s viscosity per shift. Each reading stands alone. Which control chart fits?

  1. Xbar-R chart
  2. P chart
  3. U chart
  4. I-MR chart

Answer: D. An I-MR chart fits continuous data with one reading per point. Xbar-R needs subgroups. A P chart tracks defective items. A U chart tracks defects per unit.

Question 18 (Control, Analyze level)

One point on a control chart falls above the upper control limit. What is the best reading?

  1. A special cause may be present. Investigate.
  2. The product is out of specification.
  3. The process is capable.
  4. Only common-cause variation exists.

Answer: A. Control limits come from process data, not customer specifications. A point outside them signals a likely special cause. It does not prove a spec failure.

Question 19 (Control, Apply level)

A team redesigns a fixture so a part fits only in the correct direction. Which control method is this?

  1. Kanban
  2. 5S Sort
  3. Poka-yoke
  4. CuSum chart

Answer: C. Poka-yoke is mistake-proofing that prevents or flags an error. Kanban signals replenishment. 5S organizes the workplace. A CuSum chart detects small shifts.

Question 20 (Control, Evaluate level)

Which item belongs in the response plan of a control plan?

  1. The SIPOC diagram
  2. The action, owner, and timing when a metric goes out of control
  3. The original problem statement
  4. The sampling frequency

Answer: B. A response plan says who does what when a metric signals trouble. Sampling frequency belongs in the monitoring part of the control plan.

Score Yourself and Plan Your Next Step

The exam pass mark is 70%. On a 20-question set, 14 correct answers equal 70%. Use the table to plan.

What your score on this set suggests
ScoreWhat it suggestsNext step
18 to 20Strong graspTake a full 100-question timed mock exam.
14 to 17Near the pass lineFix your weakest phase, then retest.
10 to 13Clear gapsReview the courseware for each missed topic.
Under 10Early in your prepStudy the full body of knowledge before you retest.

A small set gives a rough signal only. A full mock exam gives a better one.

Six Common Traps on the Green Belt Exam

  1. Averaging yields. RTY multiplies step yields (Question 3).
  2. Ignoring opportunities. DPMO needs the opportunities per unit (Question 2).
  3. Mixing up Cp and Cpk. Cpk accounts for centering (Question 10).
  4. Misreading the p-value. It is not the chance that the null is true (Question 11).
  5. Using the wrong test. Match the test to the group count and data type (Questions 12 and 13).
  6. Confusing control limits with specification limits. They come from different sources (Question 18).

Green Belt Exam Questions FAQs

How many questions are on the IASSC Green Belt exam?

The IASSC Green Belt exam has 100 multiple-choice questions and a 3-hour time limit. Each question is worth one mark.

What is the passing score for the Green Belt exam?

The pass mark is 70%, which equals 70 marks out of 100.

Is the Green Belt exam open book?

No. The exam is closed book. You receive a reference document with the formulas and tables you may need.

Which phase has the most Green Belt exam questions?

The Measure phase has the most, at about 32% of the exam. The Improve phase has the fewest, at about 8%.

Are these the real Green Belt exam questions?

No. These are original practice questions. They follow the exam’s topics and weights but are not copied from any exam.

How hard is the Green Belt exam?

The exam tests up to the Evaluate level, so expect scenario questions and not only definitions. Timed practice and formula drills help most.

How does the IASSC exam differ from the ASQ Green Belt exam?

IASSC has no prerequisites and uses 100 questions. ASQ’s CSSGB needs three years of paid work experience and uses a longer exam.

How should I study with sample questions?

Answer in timed sets, log each miss by phase, and review the matching topic. Then retake a fresh set after a few days.

Final Words

Good practice mirrors the real exam. Study to the weighted blueprint, work under time pressure, and learn from every miss. Use these 20 questions as a check, then move to a full mock exam.

Next Step: Prepare With SSDSI

Six Sigma Development Solutions (SSDSI) is an IASSC accredited trainer. You can verify us on the PeopleCert list. Our Lean Six Sigma trainings hold a five-star rating on Google reviews. We have certified more than 5,322 people at over 600 organizations in 52 cities.

Our Green Belt training prepares you for the IASSC exam. Master Black Belt mentors guide learners through real projects. You can add the IASSC exam for a separate fee, or earn your certificate through a project. For more practice, try SSDSI’s Green Belt mock exam or its 100-question practice exam. Book a call to plan your prep.

About Six Sigma Development Solutions, Inc.

Six Sigma Development Solutions, Inc. offers onsite, public, and virtual Lean Six Sigma certification training. We are an Accredited Training Organization by the IASSC (International Association of Six Sigma Certification). We offer Lean Six Sigma Green Belt, Black Belt, and Yellow Belt, as well as LEAN certifications.

Book a Call and Let us know how we can help meet your training needs.